PPS

Short Description:

• Physical:
• Density: 1.44
• Bulk Density: /
• Mold Shrinkage (Machine Direction): 0.4
• Mold Shrinkage (Transverse Direction): 0.70
• Mold Shrinkage: /
• Melt Flow Rate (337℃. 6.7Kg): /
• Melt Viscosity (380℃.77HZ): /
• Particle size (D50): /
• Water Absorption (23°C-sat): 0.02
• Water Absorption (24h @23°C): /
• Flammability(1.6 mm): /
• Mechanical :
• Tensile Stress at Break (5 mm/min): 150
• Tensile Modulus at Break (1 mm/min): /
• Elongation at Break (23℃): 2.0
• Flexural Modulus at Break (23℃): 8
• Flexural Strength at Break: 230
• Charpy Impact Strength @23℃ (V-notched): 10
• Charpy Impact Strength @-30℃ (V-notched): 10
• Unnotched Charpy Impact Strength @23℃: 45
• Co-eff.of Friction, Static/Dynamic: /
• Thermal :
• Melting Temperature (10°C/min): 280
• Melting Point: /
• Heat Deflection Temp. High Load (1.8 MPa): 255
• Coeff. Of Linear Them. Expansion (parallel): 0.3
• Coeff. Of Linear Them. Expansion (normal): 0.5
• Flammability (0.3 mm): V-0
• Flammability (3.0 mm): V-0
• Glass Transition (Tg):
• Melt Flow Rate (380℃, 5kg):
• Thermal expansion coefficient (T<Tg) along flow:
• Thermal expansion coefficient (T>Tg) along flow:
• Thermal expansion coefficient (T<Tg) across flow:
• Thermal expansion coefficient (T>Tg) across flow:
• Thermal expansion coefficient (T<Tg):
• Thermal expansion coefficient (T>Tg):
• Thermal conductivity (23℃):
• Electrical Properties:
• Dielectric Strength (60*60*1mm³):
• Relative Permittivity (100Hz&1MHz):
• Dissipation Factor (100Hz&1MHz):
• Dielectric Strength: 20
• Relative Permittivity (4 GHz): 4
• Dissipation Factor (4 GHz): 0.002
• Volume Resistivity: 10^15
• Surface Resistivity: /
• CTI: 125
• Typical Processing Conditions:
• Drying Temp. / Time: 150℃&3h
• Injection Pressure: 30~100
• Injection Speed:
• Injection Molding Melt Temp.: 290~330
• Injection Molding Mold Temp.: 120~160
• Temperature Settings:
• Hopper Temperature:
• Gate:
• Process Temperature: