PEI

Short Description:

• Physical:
• Density: 1.36
• Bulk Density: /
• Mold Shrinkage (Machine Direction): /
• Mold Shrinkage (Transverse Direction): /
• Mold Shrinkage: 0.3-0.5
• Melt Flow Rate (337℃. 6.7Kg): 8-15
• Melt Flow Rate (316℃. 5Kg):
• Melt Flow Rate:
• Melt Viscosity (380℃.77HZ): /
• Particle size (D50): /
• Water Absorption (23°C-sat): 0.25
• Water Absorption (24h @23°C):
• Flammability(1.6 mm): /
• Ash Content:
• Moisture Content:
• Volatile:
• Mechanical :
• Tensile Stress at Break (5 mm/min): 200
• Tensile Modulus at Break (1 mm/min):
• Elongation at Break (23℃): 1.6
• Flexural Modulus at Break (23℃): 17.0
• Flexural Strength at Break: 270
• Charpy Impact Strength @23℃ (V-notched): 7.0
• Charpy Impact Strength @-30℃ (V-notched): /
• Unnotched Charpy Impact Strength @23℃: /
• Co-eff.of Friction, Static/Dynamic:
• Shore Hardness:
• Thermal :
• Melting Temperature (10°C/min):
• Melting Point:
• Heat Deflection Temp. High Load (1.8 MPa): 205
• Tg（0°C/min）:
• Coeff. Of Linear Them. Expansion (parallel): 0.25
• Coeff. Of Linear Them. Expansion (normal): 0.25
• Flammability (0.3 mm): V-0
• Flammability (3.0 mm): V-0
• Glass Transition (Tg): 217
• Melt Flow Rate (380℃, 5kg): /
• Thermal expansion coefficient (T<Tg) along flow: /
• Thermal expansion coefficient (T>Tg) along flow: /
• Thermal expansion coefficient (T<Tg) across flow: /
• Thermal expansion coefficient (T>Tg) across flow: /
• Thermal expansion coefficient (T<Tg): /
• Thermal expansion coefficient (T>Tg): /
• Thermal conductivity (23℃): /
• Electrical Properties:
• Dielectric Strength (60*60*1mm³):
• Relative Permittivity (100Hz&1MHz): /
• Dissipation Factor (100Hz&1MHz): /
• Dielectric Strength: /
• Relative Permittivity (4 GHz): /
• Dissipation Factor (4 GHz): /
• Volume Resistivity: 10^5
• Surface Resistivity: 10^5
• CTI: /
• Typical Processing Conditions:
• Drying Temp. / Time: 150℃&4~6h
• Injection Pressure: /
• Injection Speed: Moderate to High
• Injection Molding Melt Temp.: 350~400
• Injection Molding Mold Temp.: 140~180
• Extrsuion/Blow Molding Melt Temp.:
• Temperature Settings: /
• Hopper Temperature: /
• Gate: /
• Process Temperature: